Short Path Distillation Kit
$499.80
Short Path Distillation Kit
This kit contains essential components for short path distillation. All glass parts are manufactured from high quality 3.3 borosilicate glass.
Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port features a condenser coil and three ¼” hose nozzles, two for condenser and one for vacuum.
The cow-type Distillation Receiver has one 24/40 outer joint and three 24/40 inner joints that can be used to attach up to three 50ml Single Neck round bottom flasks.
The 250ml round bottom 2-Neck flask includes 24/40 outer joints to accept the Distillation Head and the Rubber Inlet Adapter. The Rubber Inlet Adapter holds the tapered Glass Inlet Tube.
The Thermometer, with a range of -10° to 50° C and filled
with a petroleum-based solution with red dye, connects to
the Distillation Head through the 10/30 port.
Penny Head Glass Stoppers are included to cap the 50ml
Single Neck round bottom flasks after distillate is collected.
- Description
- Additional information
- PROPERTIES OF GLASSWARE AND PLASTICWARE
- Reviews (0)
Description
This kit contains essential components for short path distillation. All glass parts are manufactured from high quality 3.3 borosilicate glass.
Short Path Distillation Head with 24/40 flask joints and 10/30 thermometer port features a condenser coil and three ¼” hose nozzles, two for condenser and one for vacuum.
The cow-type Distillation Receiver has one 24/40 outer joint and three 24/40 inner joints that can be used to attach up to three 50ml Single Neck round bottom flasks.
The 250ml round bottom 2-Neck flask includes 24/40 outer joints to accept the Distillation Head and the Rubber Inlet Adapter. The Rubber Inlet Adapter holds the tapered Glass Inlet Tube.
The Thermometer, with a range of -10° to 50° C and filled
with a petroleum-based solution with red dye, connects to
the Distillation Head through the 10/30 port.
Penny Head Glass Stoppers are included to cap the 50ml
Single Neck round bottom flasks after distillate is collected.
Contents:
Short Path Distillation Head, Vacuum Jacketed, 24/40 . . . . . . . 1
Flask, Round Bottom, 2-Neck 250ml . . . . . . . . . . . . . . . . . . . . . . 1
Distillation Receiver, Cow-Type, 1-to-3, 24/40 . . . . . . . . . . . . . . . 1
Glass Inlet Tube, with Tapered End, 11” . . . . . . . . . . . . . . . . . . 1
Clamp for Jointed Glassware, Plastic, size 24 . . . . . . . . . . . . . . 6
Thermometer, Red Spirit, -10° to 50° C, 12” . . . . . . . . . . . . . . . 1
Flask, Round Bottom, Single Neck, 50ml, 24/40 . . . . . . . . . . . . . 3
Inlet Adapter, Rubber, with Glass Connector, 24/40 . . . . . . . . . . 1
Stopper, Glass, Penny Head, 24/40 . . . . . . . . . . . . . . . . . . . . . 3
Additional information
| Type | SPDK01 |
|---|
Properties of United Scientific Glassware and Plasticware
Properties of United Glassware
Chemical Composition: Our glassware is manufactured from low-expansion Type 1, Class A Borosilicate 3.3 glass that complies with ASTM E438 Standard Specification for Glasses in Laboratory Apparatus. It is low alkali glass with a typical chemical composition of approximately 81% silica, 13% boric oxide, 4% sodium oxide, and 2% aluminum oxide. It is virtually free of magnesia-lime-zinc group, and contains only traces of heavy metals.
Thermal Properties: Borosilicate glass has a low coefficient of thermal expansion. Therefore, the thermal stresses under a given temperature gradient are low, and the glass can withstand higher temperature gradients as well as sudden temperature changes / thermal shocks. However, even minute scratching of glass surface can reduce its thermal resistance. The ‘Strain Point’ (about 500°C) is generally recommended as the maximum safe operating temperature for United glassware. The glass may acquire permanent stresses upon cooling if it is heated above 500°C. Our glassware is annealed in modern ovens under strictly controlled conditions to ensure minimal residual stress.
Chemical Durability: United glassware is highly resistant to water, neutral and acid solutions, concentrated acids and their mixtures, as well as to chloride, bromine, iodine, and organic matters. Even during extended period of reaction and at temperatures above 100°C, its chemical resistance exceeds that of most metals and other materials. Our glassware can withstand repeated dry and wet sterilization and offers good resistance against various chemicals, except for hydrofluoric acid, hot phosphoric acid and alkaline solutions.
Optical Properties: United glassware has a clear and colorless appearance, and shows no noticeable absorption in the visible region of the spectrum.
Safety: Treated with proper care, United glassware will offer long-term, reliable service in the laboratory. Please contact us for detailed recommendations regarding heating and cooling, mixing and stirring, vacuum and pressure, cleaning, and safety precautions that must be followed while using glassware.
Physical Properties of United Plastic Labware
Our plastic labware is manufactured from high-quality resins. Treated with proper care, United plasticware will offer long-term satisfactory service in the laboratory.
Please refer to the chart below for physical properties of United plasticware.
| Resin | Maximum Use Temperature (°C) | Brittleness Temperature (°C) | Transparency | Autoclavable* |
| High Density Polyethylene (HDPE) | 120 | -100 | Translucent | No |
| Low Density Polyethylene (LDPE) | 80 | -100 | Translucent | No |
| Polycarbonate (PC) | 135 | -135 | Clear | Yes |
| Acrylic (PMMA) | 50 | 20 | Clear | No |
| Polymethylpentene (PMP) | 175 | 20 | Clear | Yes |
| Polypropylene (PP) | 135 | 0 | Translucent | Yes |
| Polystyrene (PS) | 90 | 20 | Clear | No |
| Polytetrafluoroethylene (PTFE) | 270 | -200 | Opaque | Yes |
| Polyvinyl Chloride (PVC) | 70 | -30 | Clear | No |
* Autoclave at 121°C, 15 psi for 20 minutes. Clean and rinse item with distilled water before autoclaving. Certain chemicals which have no appreciable effect on resins at room temperature may cause deterioration at autoclaving temperatures.
Reviews
There are no reviews yet.